微信注册 一步即可
您需要 登录 才可以下载或查看，没有账号？立即注册  
x
SAE J286-1996 (R) SAE NO.2 CLUTCH FRICTION TEST MACHINE GUIDELINES
1. Scope-This SAE Recommended Practice is intended as a guide toward implementation of a standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use.
The SAE No.2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutch with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems.
2. References
2.1 Related Publications-The following publications are for information purposes only and are not a required part of this specification.
2.1.1 SAEPUBLICATIONS-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J1499SAE Band Friction Test Machine(SAE) Test Machine Guidelines
SAE J1646-Glossary of Terms-Lubricated Friction Systems
SAE Paper 670051-New Fixture for Testing Friction Materials for Automatic Transmission Clutch
2.1.2 FORD MOTOR COMPANY PUBLICATION-Available from Ford Motor Company, Components Engineering Department,36200 Plymouth Road, Box 14, Livonia, Ml 48150.
Ford MERCON®Specification
2.1.3 GENERAL MOTORS PUBLICATION-Available from General Motors Corporation, Powertrain Division,M/C965, Ecorse and Wiard Roads, Ypsilanti, Ml 48198-6918.
GM DEXRON®-ll Specification, GM6297M
3. Test Equijpment
3.1 SAE No.2 Friction Test Machine with breakaway accessory.
3.2 Flywheels to deliver desired kinetic energy.
加载中请耐心等待。双击可全屏预览。发现文档有侵权/水印/二维码/链接等请举报。
| 
linuxxxx 