SAE J267-1999 (R)WheelsRims-Trucks-Performance Requirements and Test Procedures

1. Scope-This SAE Recommended Practice provides minimum performance requirements and uniform laboratory procedures for fatigue testing of wheels and demountable rims intended for normal highway use on trucks, buses, truck-trailers, and multipurpose vehicles. For other wheels intended for normal highway use and temporary use on passenger cars, light trucks, and multipurpose vehicles, see SAE J328. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, see SAE J1204. For bolt together military wheels, see SAE J1992. This document does not cover other special application wheels and rims.

2. References
2.1 Applicable Publications-The following publications form a part of this specification to the extent specified herein. Unless otherwise indicated, the latest issue of SAE publications shall apply.
2.1.1 SAE PUBLICATIONS-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J328-Wheels-Passenger Cars and Light Truck Performance Requirements and Test Procedures SAE J393-Nomenclature-Wheels, Hubs, and Rims for Commercial Vehicles
SAE J1204-Wheels-Recreational and Utility Trailer Test Procedure
SAE J1992-Wheels/Rims-Military Vehicles-Test Procedures and Performance Requirements
SAE HS 3300-Wheels Standards Supplement
2.1.2 TIRE AND RIM ASSOCIATION PUBLICATION-Available from The Tire and Rim Association, Inc.,175 Montrose West Avenue, Suite 150, Copley, OH 44321.
Yearbook, The Tire and Rim Association Inc.
2.2 Related Publications-The following publications are provided for information purposes only and are not a required part of this document.
2.2.1 ISO PUBLICATION-Available from ANSI,11 West 42nd Street, New York, NY 10036-8002.
ISO 3006-Road Vehicles-Passenger Car Wheels-Test Methods ISO 3894-Road vehicles-Truck-Wheels/rims-Test methods ISO 3911-Wheel/rims-Nomenclature, designation, marking, and units of measurement

加载中请耐心等待。双击可全屏预览。发现文档有侵权/水印/二维码/链接等请举报。

好东西！

路过

用不着，下错了

好标准！