微信注册 一步即可
您需要 登录 才可以下载或查看，没有账号？立即注册  
x
SAE J300-1999 Engine Oil Viscosity Classification
1. Scope-This SAE Standard defines the limits for a classification of engine lubricating oils in rheological terms only. Other oil characteristics are not considered or included.
2. References
2.1 Applicable Publications-The following publications form a part of this specification to the extent specified herein. Unless otherwise specified, the latest issue of SAE publications shall apply.
2.1.1 SAE PUBLICATIONS-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J510-Lubricants for Two-Stroke-Cycle Engines
SAE J1536-Two-Stroke-Cycle Engine Oil Miscibility/Fluidity Classification
2.1.2 ASTM PUBLICATIONS-Available from ASTM,100 Bar Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM D97-Standard Test Method for Pour Point of Petroleum Oils
ASTM D 445-Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids(and the Calculation of Dynamic Viscosity)
ASTM D2500-Standard Test Method for Cloud Point of Petroleum Oils
ASTM D3244Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM D3829Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D4683-Standard Test Method for Measuring Viscosity at High Temperature and High-Shear Rate by Tapered Bearing Simulator
ASTM D4684Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4741Standard Test Method for Measuring Viscosity at High Temperature and High-Shear Rate by Tapered-Plug Viscometer
ASTM D5133Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5293Standard Test Method for Apparent Viscosity of Engine Oils Between-30 and-5C Using the Cold-Cranking Simulator
ASTM D5481Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
加载中请耐心等待。双击可全屏预览。发现文档有侵权/水印/二维码/链接等请举报。
| 
