微信注册 一步即可
您需要 登录 才可以下载或查看，没有账号？立即注册  
x
SAE J328-1994 (R)WHEELS-PASSENGER CAR AND LIGHT TRUCK PERFORMANCE REQUIREMENTS AND TEST PROCEDURES
Foreword-This Document has not changed other than to put it into the new SAE Technical Standards Board Format.
1. Scope-This SAE Recommended Practice provides minimum performance requirements and uniform procedures for fatigue testing of wheels intended for normal highway use and temporary use on passenger cars, light trucks, and multipurpose vehicles. For heavy truck wheels and wheels intended to be used as duals, see SAE J267. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, see SAE J1204. These minimum performance requirements apply only to wheels made of materials included in Tables 1 to 4.
2. References
2.1 Applicable Publications-The following publications form a part of this specification to the extent specified herein. The latest issue of SAE publications shall apply.
2.1.1 SAE PUBLICATIONS-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J267-Wheels/Rims-Trucks-Test Procedures and Performance Requirements
SAE J1204-Wheels-Recreational and Utility Trailer Test Procedures
2.1.2 ISO PUBLICATIONS-Available from ANSI,11 West 42nd Street, New York, NY 10036-8002.
ISO 3006-Road vehicles-Passenger car road wheels-Test methods
ISO 3911-Wheels/rims-Nomenclature, designation, marking, and units of measurement
2.1.3 TIRE AND RIM ASSOCIATION PUBLICATION-Available from The Tire and Rim Association, Inc.,175 Montrose West Avenue, Suite 150, Copley, OH 44321.Yearbook, The Tire & Rim Association Inc.
加载中请耐心等待。双击可全屏预览。发现文档有侵权/水印/二维码/链接等请举报。
| 
jamie2008 