SAE J276-2002 Steering Frame Lock for Articulated Loaders and Tractors

Foreword-This Document has not changed other than to put it into the new SAE Technical Standards BoardFormat. Definitions are Section 3. All other section numbers have changed accordingly. SAE J1057 has been replaced with SAE J/ISO 6165.

1. Scope-This SAE Standard is applicable to articulated frame loaders and tractors as defined by SAE J/ISO
6165, and rollers and compactors as defined by SAE J1017, when equipped with steering, frame locking device. The scope is limited to machines where hazards exist due to maintenance operations.
1.1 Purpose-This document provides the performance requirements for a steering, frame locking device which when used will prevent unintended articulation of the machine either during shipment or maintenance operations. In addition, it provides mounting position, storage on the machine and identification requirements.

2. References
2.1 Applicable Publications-The following publications form a part of this specification to the extent specified herein. The latest issue of SAE publications shall apply.
2.1.1 SAE PUBLICATIONS-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J1017-Nomenclature, Rollers and Compactors
SAE J/ISO 6165-Earthmoving Machinery-Basic Types-Vocabulary

3. Definitions
3.1 steering, Frame Locking Device-One or more links, bars, or equivalent including attaching parts and attaching points to the machine frames.

4. Requirements
4.1 Mounting Positions-The device shall be arranged so that it can secure the machine in a straight-ahead position. If it is necessary to articulate the machine to perform maintenance functions, the device shall also provide locking capability in the required articulated position. The device shall be mounted on the side normally used for access to the operator's seat. Appropriate installation or use instructions should accompany the unit.

加载中请耐心等待。双击可全屏预览。发现文档有侵权/水印/二维码/链接等请举报。

SAE J276-2002 Steering Frame Lock for Articulated Loaders and Tractors

Foreword-This Document has not changed other than to put it into the new SAE Technical Standards BoardFormat. Definitions are Section 3. All other section numbers have changed accordingly. SAE J1057 has been replaced with SAE J/ISO 6165.

1. Scope-This SAE Standard is applicable to articulated frame loaders and tractors as defined by SAE J/ISO
6165, and rollers and compactors as defined by SAE J1017, when equipped with steering, frame locking device. The scope is limited to machines where hazards exist due to maintenance operations.
1.1 Purpose-This document provides the performance requirements for a steering, frame locking device which when used will prevent unintended articulation of the machine either during shipment or maintenance operations. In addition, it provides mounting position, storage on the machine and identification requirements.

2. References
2.1 Applicable Publications-The following publications form a part of this specification to the extent specified herein. The latest issue of SAE publications shall apply.
2.1.1 SAE PUBLICATIONS-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J1017-Nomenclature, Rollers and Compactors
SAE J/ISO 6165-Earthmoving Machinery-Basic Types-Vocabulary

3. Definitions
3.1 steering, Frame Locking Device-One or more links, bars, or equivalent including attaching parts and attaching points to the machine frames.

4. Requirements
4.1 Mounting Positions-The device shall be arranged so that it can secure the machine in a straight-ahead position. If it is necessary to articulate the machine to perform maintenance functions, the device shall also provide locking capability in the required articulated position. The device shall be mounted on the side normally used for access to the operator's seat. Appropriate installation or use instructions should accompany the unit.

加载中请耐心等待。双击可全屏预览。发现文档有侵权/水印/二维码/链接等请举报。