SAE J288-2002 (R)Snowmobile Fuel Tanks

1. Scope-To provide minimum performance requirements for non-pressurized fuel tanks used on snowmobiles as defined in SAE J33.

2. References
2.1 Applicable Publications-The following publications form a part of the specification to the extent specified herein. Unless otherwise indicated the latest revision of SAE publications shall apply.
2.1.1 SAE PUBLICATION-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAEJ33-Snowmobile Definitions and Nomenclature-General
2.1.2 ASTM PUBLICA TIONS-Available from ASTM,100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM D 635-Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position
ASTM D 1525-Test Method for Vicat Softening Temperature of Plastics

3. Requirements
3.1 The tank shall remain functional in a temperature range of -40 to +60C when tested in accordance with Section 4.
3.2 The tank material specifications should indicate resistance to gasoline, lubricating oils, anti-icing, and other additives that may be used with snowmobile fuel.
3.3"The plastic material of the fuel tank should be rendered essentially opaque by the addition of at least 0.5% by weight of a suitable pigment that will not affect, nor be affected by, the fuel. This requirement does not apply to tanks which are so mounted or stored that they are not exposed to sunlight.1

加载中请耐心等待。双击可全屏预览。发现文档有侵权/水印/二维码/链接等请举报。

楼主加鸡腿！

谁说不是呢